Amtico tile effect floor cleaning in Cambridge
This floor had been laid for over 20 years and hadn't had a deep clean in many years, but the floor came up well and still has years in it yet!
1- Inspection: Your floor will be inspected for any damages or cleaning challenges
– BE AWARE – some deep scratch marks cannot be removed. 2- Dry soil Removal: Sweeping the floor well to remove dry soil that can cause further wear
to the floor during the cleaning process is removed. 3- Cleaning: The Amtico Cleaners are applied to the floor and then scrubbed by
means of electrical scrubbers with soft brushes or pads depending
on your floors requirements. A special pad is used as the last step to
prepare the surface for the application of Amtico dressing. 4- Rinse: The floor is then rinsed to remove the dirt (Slurry). Sometimes the cleaning
process is repeated if the desired results are not achieved the first time round. 5- Drying: The floor is then dried 6- Application of dressing (sealer) This steps is crucial for ensuring your floor last as long as possible.
The dressing acts as a barrier to soiling and scuffing to the Amtico itself. Depending on how many coats are applied – it will deliver a sheen on the floor.
– No traffic is allowed on the floor for 2 – 4 hours following the
application of dressing – PLEASE NOTE – areas with low airflow and higher humidity can take
considerably longer to cure and we advise clients to use common sense before
returning the area to full use.
Maintenance and Care: We strongly advise the use of a Amtico Maintenance Kit.
Felt pads for furniture – Furniture can easily scratch and wear out your floors and therefore we advise the use of good quality felt pads We can provide you with a high quality felt pad system. A good quality felt pad will not just protect your floor from wearing out fast but will also protect your furniture from unnecessary stress when dragged.
